MAVRIX WELDING RETROFIT

Mavrix understands that sometime equipment gets old and spare parts are no longer available. This happens frequently with other manufacturer’s controls, motor and drives. We don’t shy away from integrating with other equipment and either have the machine sent to use or we can design around the current machine and ship and install at the customer site.

Retrofit #1

The Opportunity
This customer had a home built weld lathe that they used for manually welding steel mill rolls. They asked if we could design automation around this machine and then let them do the install.

Retrofit_2

The Solution
A new machine platform was required to fit the travel arrangement. Working close with the customer to gather the requirement our Horizontal Vers-O-Weld machine was developed.

Retrofit #2

Retrofit_2
The Opportunity
This customer had urchased a foreign supplied manipulator and wanted to add automation to it and for our control to run the motors on the positioner.
 
The Solution
We replaced the motor that were compatible with our control drives and provided the welding automation to the customer. The final machine configuration was completed by the customer including installation of legs to support the automation. Photo of final project not available.

Retrofit #3

Retrofit_3

The Opportunity
Retrofit_3Customer had an old Welding Alloys yolk type positioner and the parts were no longer readily available. They had several other Mavrix machines and asked if we could replace all the welding automation, motors and controls and replace it with our content.
 
The Solution
After a trip to the customer for evaluation we had them ship the machine to our facility to perform cleaning and new paint on the base machine. Integration of a new motor with the current gearbox and new control for the welding automation and servo oscillator had them back and running in 4 weeks.

Planar Client Options
Layout Style
  • Wide
  • Boxed
Theme Preview